​भारत में मई के पहले हफ्ते में 4 नए स्मार्टफोन लॉन्च होंगे। 4 से 9 मई के बीच वनप्लस और वीवो अपने नए डिवाइस लॉन्च करेंगी। इन फोन्स में AI फीचर्स के साथ 200 मेगापिक्सल का कैमरा और 6.3-इंच स्क्रीन जैसे फीचर्स मिलेंगे। इनकी कीमत 25,000 रुपए से लेकर 1.50 लाख रुपए तक होगी। इस हफ्ते इंडिया में भारत में लॉन्च होने स्मार्टफोंस की डिटेल्स जानिए। वीवो X300 FE वीवो एक्स300 एफई से मई महीने की शुरुआत होगा। यह मोबाइल 6 मई को इंडिया में लॉन्च होगा जो क्वालकॉम स्नैपड्रैगन 8 जेन 5 प्रोसेसर के साथ आएगा। वीवो X300 अल्ट्रा वीवो 6 मई को ही इंडिया में X300 अल्ट्रा लॉन्च करेगी, जो इस सीरीज का सबसे ताकतवर कैमरा फोन बनकर आएगा। वनप्लस नोर्ड CE6 वनप्लस नोर्ड CE6 भारत में 7 अप्रैल को लॉन्च होगा। यह मिलिट्री ग्रेड सर्टिफाइड फोन है, जो काफी मजबूत है। पानी और धूल से बचाव के लिए इसमें IP69K तक की टॉप रेटिंग दी गई है। वनप्लस नोर्ड CE6 लाइट वनप्लस का नोर्ड CE6 लाइट इंडिया में 7 अप्रैल को लॉन्च होगा। इसमें 50MP का मुख्य कैमरा और 8MP का सेल्फी कैमरा है। साथ ही, यह मिलिट्री ग्रेड सर्टिफाइड फोन है, जो इसे काफी मजबूत बनाता है।  

XUANCHENG, China, May 4, 2026 (SEND2PRESS NEWSWIRE) — As demand for durable, low-maintenance outdoor materials intensifies across commercial and residential construction, KR New Materials Co., Ltd. (KR WPC) is expanding its product portfolio with a new line of ASA/PVC co-extruded wood-plastic composite (WPC) solutions. The new range targets architects, landscape designers, contractors, and international distributors seeking outdoor materials that combine long-term weather resistance, structural stability, and minimal upkeep – without compromising on aesthetics.

Image caption: ASA/PVC co-extruded WPC decking installation – high-resolution outdoor shot.

Conventional WPC, while superior to natural timber in moisture and decay resistance, still carries a vulnerability rooted in its composition: wood fiber near the surface can absorb water over time, triggering microcracking, swelling, and gradual surface degradation in high-exposure installations. KR WPC’s ASA/PVC co-extruded approach addresses this at the structural level.

A Smarter Layered Architecture

Co-extrusion fuses two or more material layers during manufacturing – not glued on after the fact. In KR WPC’s new system, an ASA (Acrylonitrile Styrene Acrylate) capstock forms the exposed outer surface, while a PVC-based core provides dimensional stability and moisture resistance underneath.

ASA is widely used in exterior plastic applications precisely because it resists UV degradation and weathering more effectively than many alternative thermoplastics – properties that make it a preferred material for window profiles, exterior cladding, and other high-exposure building components. When used as a cap layer in WPC, ASA absorbs the environmental stress that would otherwise act directly on the wood-polymer interior.

PVC, as the structural core, brings low moisture uptake and strong dimensional behavior – reducing the risk of warping, swelling, or gap formation over seasonal cycles. The result is a board that performs in fundamentally different conditions than standard single-body WPC: less surface fatigue, fewer maintenance interventions, and better retention of color and texture over time.

Weather Resistance in Practice

Outdoor weathering is rarely dramatic – it accumulates. Repeated UV exposure dulls surfaces; wet-dry cycles stress microstructures; grime bakes in rather than washing off. These processes don’t produce immediate failure, but they shorten the functional lifespan of lesser materials and drive-up cleaning and repair costs.

KR WPC’s ASA/PVC co-extruded boards are engineered to slow this trajectory. The ASA cap acts as a barrier layer, reducing water ingress into the core and limiting UV exposure to the wood-polymer interior. Field and laboratory evaluation work referenced in the broader exterior plastics sector supports the principle that a properly specified cap layer helps keep composite cores drier and less prone to surface weathering – a consideration that becomes particularly relevant in high-humidity climates, coastal installations, and commercial settings where downtime for maintenance is costly.

Durability and Maintenance Realities

“Low maintenance” claims in the outdoor materials space require scrutiny. The more accurate promise with co-extruded WPC is this: owners avoid the seasonal staining, sealing, and surface restoration cycles associated with natural timber. Day-to-day care is limited to sweeping and periodic washing with mild cleaners – provided spills are addressed within a reasonable window rather than left to set.

ASA capstock is positioned in the market as a hard-wearing exterior surface, and product data published by manufacturers of ASA-capped systems includes abrasion and hardness metrics that support durability claims in commercial use cases. For rooftop bars, pool surrounds, restaurant terraces, and public walkways – environments where surface failure becomes a maintenance line item – these characteristics carry direct operational significance.

Design Flexibility for Coordinated Projects

With the performance layer handled, design flexibility becomes a practical advantage. KR WPC’s co-extruded WPC is available across a broad color range, with embossed wood-grain, brushed, and smoother architectural textures. Importantly, the company supports color and texture matching across its decking, cladding, and fencing lines – a capability that matters for projects where multiple outdoor surfaces need to read as a cohesive system rather than a collection of unrelated materials.

Physical samples, technical documentation, and customization options – including color, texture, size, packaging, and branding – are available through KR WPC’s B2B sales and specification support process.

Commercial Procurement Discipline

KR WPC notes that customers specifying ASA/PVC co-extruded products should request cross-section verification, material breakdown documentation (capstock resin and core resin specifications), and third-party test reports as part of the submittal process. This aligns with broader industry practice of treating documentation readiness as a procurement requirement, particularly for international projects where material specifications are scrutinized at multiple stages.

About KR New Materials (KR WPC)

KR New Materials Co., Ltd. (KR WPC) is a manufacturer and exporter of wood-plastic composite solutions headquartered in Xuancheng, China. The company specializes in WPC decking, composite exterior cladding, and composite fencing systems – including co-extruded product lines – with standard and custom-made options for B2B clients. KR WPC exports to more than 20 countries and supports OEM and ODM programs, physical sample provision, and technical documentation during customer evaluation.

To learn more visit: https://www.krecocomposites.com/

About KR New Materials (KR WPC)

KR New Materials Co., Ltd. (KR WPC) is a premier manufacturer and exporter of wood-plastic composite (WPC) solutions, headquartered in Xuancheng, China. With over 13 years of expertise, KR specializes in decking, cladding, fencing, and outdoor accessories engineered for durability, safety, and sustainability. The company holds CE, FSC, and ISO 9001 certifications, with products tested under EN, ASTM, and ASEAN standards. Operating 40+ production lines, KR exports to more than 20 countries, delivering eco-friendly and customizable outdoor materials trusted by architects, contractors, and distributors worldwide.

“KR WPC’s ASA/PVC co-extruded line delivers what specifiers demand in harsh outdoor environments – performance-backed durability, coordinated aesthetics, and supply chain transparency.” – KR WPC

WOOD PLASTIC COMPOSITE DECKING https://www.krecocomposites.com/wpc-composite-decking/

COMPOSITE EXTERIOR CLADDING https://www.krecocomposites.com/wpc-composite-cladding/

COMPOSITE FENCING PANELS https://www.krecocomposites.com/wpc-composite-fencing/

News Source: KR New Materials Co., Ltd.

To view the original post, visit: https://www.send2press.com/wire/kr-wpc-launches-asa-pvc-co-extruded-wpc-line-for-high-performance-outdoor-applications/.

This press release was issued by Send2Press® Newswire on behalf of the news source, who is solely responsible for its accuracy. www.send2press.com.

Source: https://www.send2press.com/wire/kr-wpc-launches-asa-pvc-co-extruded-wpc-line-for-high-performance-outdoor-applications/

WESTMINSTER, Colo., May 4, 2026 (SEND2PRESS NEWSWIRE) — The Kiosk Association (KMA) today announced the appointment of Matthijs Verhagen, European Sales Manager at Storm Interface, as Co-Chair of its Accessibility Committee. Verhagen joins Michael O’Hare (TFA Consulting) and Oscar Rozo (LG Electronics) to lead the committee at a critical inflection point for the self-service industry.

<br/Image caption: Kiosk Association Appoints Matthijs Verhagen as Accessibility Co-Chair to Advance Global Compliance Strategy.

With enforcement timelines accelerating for the European Accessibility Act (EAA) and new U.S. Department of Health and Human Services (HHS) Section 504 requirements, operators and manufacturers face increasing pressure to align deployed systems with evolving accessibility mandates.

FROM POLICY TO DEPLOYMENT REALITY

The KMA Accessibility Committee represents more than 100 member companies spanning kiosk hardware, software, payments, and field services—including industry leaders such as Intel, Olea Kiosks, KIOSK Information Systems, and Pyramid Computer.

Unlike policy-driven working groups, the committee is focused on deployment-scale execution—translating regulatory requirements into practical, field-tested standards that can be implemented across thousands of deployed systems.

THREE REGULATORY FRONTS DEFINING THE MARKET

Europe — EAA Compliance
With EAA enforcement approaching, KMA is aligning members on hardware, interface, and assistive technology requirements necessary for continued access to EU markets.

United States — HHS Section 504
New federal rules are redefining accessibility expectations for healthcare and public-facing digital services, requiring immediate operational planning and system updates.

Asia-Pacific — Scale Without Harmonization
Rapid self-service adoption across Asia—particularly in high-volume retail and transit environments—continues to outpace regulatory alignment, creating both opportunity and compliance risk for global OEMs and integrators.

INDUSTRY-DRIVEN STANDARDS THAT WORK AT SCALE

“The strength of the KMA is not in committee structure—it is in deployment reality,” said the Kiosk Association. “When companies like Intel, Olea, and KIOSK Information Systems align on accessibility, the result is not theoretical guidance—it is standards that work in real environments, at real scale.”

FOCUSED DELIVERABLES FOR OPERATORS AND INTEGRATORS

The KMA Accessibility Committee is actively developing:

• EAA readiness and compliance checklists
• HHS Section 504 implementation frameworks
• Accessibility ROI and retrofit vs. replace decision models
• Multi-modal interface guidance (touch, voice, and assistive technologies)

These resources are designed to help organizations move beyond compliance uncertainty and into executable deployment strategies.

ABOUT THE KIOSK ASSOCIATION (KMA)

The Kiosk Association is a global organization dedicated to advancing best practices in self-service technology. Operating under The Industry Group (TIG), KMA provides leadership in accessibility, security, and lifecycle design for kiosks, digital signage, and point-of-sale systems.

More information: http://kma.global

INDUSTRY RESOURCES (NRA ATTENDEE ACCESS)

In conjunction with the National Restaurant Association Show, The Industry Group is providing limited access to operator-focused research tools, including:

• Retrofit vs. Replace Decision Kit with worksheet
• Self-Service ROI Calculator
• Voice AI in Self-Service 2026 (Drive-thru, kiosks, cost models)
• Edge AI upgrade planning tools (Intel / Hailo / legacy systems)

Designed to answer one critical question:
“Should we upgrade what we have—or start over?”

Access: https://keefner3.gumroad.com/

MEDIA CONTACT
The Industry Group
craig@industrygroup.org

News Source: Kiosk Manufacturer Association

To view the original post, visit: https://www.send2press.com/wire/kiosk-association-appoints-matthijs-verhagen-as-accessibility-co-chair-to-advance-global-compliance-strategy/.

This press release was issued by Send2Press® Newswire on behalf of the news source, who is solely responsible for its accuracy. www.send2press.com.

Source: https://www.send2press.com/wire/kiosk-association-appoints-matthijs-verhagen-as-accessibility-co-chair-to-advance-global-compliance-strategy/

​टाटा मोटर्स की इलेक्ट्रिक व्हीकल यूनिट टाटा.ईवी ने देश की पहली कूपे SUV कर्व ईवी की नई सीरीजX लॉन्च की है। इसकी शुरुआती कीमत 16.99 लाख रुपए (एक्स-शोरूम, मुंबई) रखी गई है। कार फुल चार्ज पर 502 किलोमीटर चलती है। कर्व ईवी सीरीज X में दो मुख्य वैरिएंट्स- अकम्पलिश्ड X 55 और इ्म्पावर्ड X 55 मिलेंगे। टाटा ने इसमें नया ‘नाइट्रो क्रिमसन’ कलर भी जोड़ा है। इसके अलावा यह आइकॉनिक डार्क एडिशन में भी अवेलेबल होगी। कंपनी इस पर लाइफटाइम हाई वोल्टेज बैटरी वारंटी भी दे रही है।  

​टेक कंपनी वीवो 6 मई को भारत में अपनी प्रीमियम स्मार्टफोन सीरीज ‘X300’ के दो नए स्मार्टफोन लॉन्च करने की घोषणा की है। कंपनी वीवो X300 अल्ट्रा और वीवो X300 FE पेश करेगी। इसमें सबसे खास अल्ट्रा मॉडल होगा जिसे सबसे पावरफुल कैमरा स्मार्टफोन में से एक माना जा रहा है। इसमें कंपनी ZEISS तकनीक के साथ एडवांस टेलीफोटो लेंस के साथ मार्केट में उतारा जाएगा। कीमत: 60 हजार से शुरू हो सकती है रेंज कंपनी 6 मई को दोपहर 12 बजे एक इवेंट में इन स्मार्टफोन्स को लॉन्च करेगी। डिजाइन और बिल्ड: प्रीमियम लुक के साथ मिलेगी डस्ट-वॉटर सेफ्टी कैमरा: 200 मेगापिक्सल का मेन सेंसर और अल्ट्रा जूम फोटोग्राफी के शौकीनों के लिए X300 अल्ट्रा में ट्रिपल रियर कैमरा सेटअप दिया गया है। वहीं, X300 FE में 50 मेगापिक्सल का सोनी OIS प्राइमरी सेंसर, 50 मेगापिक्सल का टेलीफोटो लेंस और 8 मेगापिक्सल का अल्ट्रा-वाइड लेंस दिया गया है। इसमें वीवो की सिग्नेचर ‘ऑरा लाइट’ भी मौजूद है। स्पेसिफिकेशन्स: स्नैपड्रैगन 8 एलीट जेन 5 और दमदार डिस्प्ले पावरबैकअप: 6600mAh की बड़ी बैटरी और फास्ट चार्जिंग बैटरी के मामले में इंडिया मॉडल्स में कुछ बदलाव किए गए हैं।